CP-Type Power Cutters
(Operational One Blade Type) 5 types

Only one blade is operational with the CP-type power cutters. These are useful when performing a cut by placing the fixed blade on materials, or when it is difficult to execute a precise cut with a cutter with two operational blades because it is difficult to take an accurate aim. 　 CP20(Blades sold separately) 　 CP30(Blades sold separately)

Model No.	Overall length (mm)	Weight (g)	Diameter	Air pressure (N)
CP10	132	220	36	588
CP20	155	400	45	1372
CP20X	242	600	45	2254
CP30	185	630	56	2744
CP30X	277	940	56	4410

*	CP20X is a boosted-up version of the CP20 CP30X is a boosted-up version of the CP30

Model No.	S-type blade foe copper	P-type Blades for steel	Z-type Blades for piano wire	EP-type Blades for steel	F-type Blades for plastics	FD-type Blades for plastics
CP10	S400		Z400	EP400	F300	FD300
CP20	S500	P600	Z600	EP600	F500	FD500
CP20X	S500	P600	Z600	EP600	F500	FD500
CP30	S700	P800	Z800	EP100	F900	FD900
CP30X	S700	P800	Z800	EP100	F900	FD900

Model No.	Cutting capacity (Diameter=mm)
	Copper	Steel	Piano wire	Plastics(Soft)	Plastics(Hard)
CP10	1.6	1.0	0.5	4.0	2.0
CP20	2.6	2.0	1.0	7.0	5.0
CP20X	2.6	2.0	1.0	7.0	5.0
CP30	3.3	2.8	1.2	9.0	6.5
CP30X	4.5	3.8	1.2	9.0	6.5

返回